Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-60-R-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output RPM:||29||Overhung Load:||1,415|
|Gear Drive Reductions:||Single||Input HP:||0.674|
|Output Shaft Assembly Code:||R||Output Style:||R|
|Shaft Seal Material:||Viton||Input Keyway (C Face):||1/8 x 1/16|
|Housing material:||Cast Iron||Output Key:||1/4 x 1.44|
|Ratio:||60:1||Center Distance Range:||1" thru 3.25"|
|Ratio Range:||60:1||Product Type:||Right Angle|
|Input Diameter (in):||0.5 in||HP Range:||1/2 to 3/4 HP (< 1)|
|Input Bore (C Face):||0.5||Input RPM:||1,750|
|Output Torque:||940||Output Diameter (in):||1.000 in|
|Series Style:||GRG-BMQ-R||Model Code:||BMQ821|
|No. of Gear Reductions:||Single||Mounting Style:||Base|
|Service Factor:||1||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Style:||C-face Quill||Output Torque Range:||500 to 1000 in lbs|
|Frame Size:||48||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Shaft Orientation:||R||Reducer Style:||Worm - Right Angle|
|Center distance (inch):||2.06||Gear Type:||Worm|