Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-100-L-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output shaft:||Shaft||Input RPM:||1,750|
|Output Torque:||439||Mounting Style:||Base|
|Center distance (inch):||2.06||Reducer Style:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Center Distance Range:||1" thru 3.25"|
|Input Diameter (in):||0.5 in||Output RPM:||17|
|No. of Gear Reductions:||Single||Gear Type:||Worm|
|Input Keyway (C Face):||1/8 x 1/16||Ratio Range:||100:1 to250:1|
|Series Style:||GRG-BMQ-L||Output Torque Range:||250 to 500 in lbs|
|Output Key:||1/4 x 1.44||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Service Factor:||1||Output Shaft Orientation:||L|
|Housing material:||Cast Iron||Product Type:||Right Angle|
|Output HP:||0.122||Model Code:||BMQ821|
|Input Style:||C-face Quill||Series:||GR Series - Ironman Worm Gear Reducers|
|Input HP:||0.217||HP Range:||1/3 HP or Less (< 1/2)|
|Output Shaft Assembly Code:||L||Ratio:||100:1|
|Overhung Load:||1,580||Shaft Seal Material:||Viton|
|Input Bore (C Face):||0.5||Output Diameter (in):||1.000 in|