Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-80-L-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Bore (C Face):||0.5||Input Keyway (C Face):||1/8 x 1/16|
|Shaft Seal Material:||Viton||Frame Size:||48|
|Output Diameter (in):||1.000 in||Reducer Style:||Worm - Right Angle|
|Model Code:||BMQ821||Housing material:||Cast Iron|
|Output Style:||L||Input Style:||C-face Quill|
|Output shaft:||Shaft||Product Type:||Right Angle|
|Ratio:||80:1||Output Shaft Orientation:||L|
|Series Style:||GRG-BMQ-L||Mounting Style:||Base|
|Service Factor:||1||Output HP:||0.19|
|No. of Gear Reductions:||Single||Output Torque:||547|
|Assembly:||BMQ-L||Center Distance Range:||1" thru 3.25"|
|Input Diameter (in):||0.5 in||Output Key:||1/4 x 1.44|
|HP Range:||1/3 HP or Less (< 1/2)||Ratio Range:||80:1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Series:||GR Series - Ironman Worm Gear Reducers|
|Input HP:||0.304||Gear Type:||Worm|
|Output RPM:||21.9||Overhung Load:||1,495|
|Output Shaft Assembly Code:||L||Input RPM:||1,750|
|Gear Drive Reductions:||Single||Output Torque Range:||500 to 1000 in lbs|
|Center distance (inch):||2.06|