Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-60-L-48
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Center Distance Range:||1" thru 3.25"||Output Diameter (in):||1.000 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Assembly:||BMQ-L|
|Center distance (inch):||2.06||Overhung Load:||1,415|
|Gear Drive Reductions:||Single||Input Style:||C-face Quill|
|Input Keyway (C Face):||1/8 x 1/16||Output Torque:||940|
|No. of Gear Reductions:||Single||Shaft Seal Material:||Viton|
|Output Shaft Orientation:||L||Output Torque Range:||500 to 1000 in lbs|
|Mounting Style:||Base||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Shaft||Input Diameter (in):||0.5 in|
|Ratio Range:||60:1||Frame Size:||48|
|Gear Type:||Worm||Output Shaft Assembly Code:||L|
|Output Style:||L||HP Range:||1/2 to 3/4 HP (< 1)|
|Product Type:||Right Angle||Output HP:||0.435|
|Model Code:||BMQ821||Output Key:||1/4 x 1.44|
|Series Style:||GRG-BMQ-L||Input Bore (C Face):||0.5|
|Reducer Style:||Worm - Right Angle||Input HP:||0.674|
|Input RPM:||1,750||Housing material:||Cast Iron|