Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-5-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69||Packaged Width:||9.06|
|Series Code:||GRG||Frame Size:||140|
|Output Shaft Assembly Code:||L||Nominal Motor HP Rating to HP @ 1750 RPM:||3|
|Reducer Style:||Worm - Right Angle||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output RPM:||350||Input RPM:||1,750|
|Output HP:||3.41||Series Style:||GRG-BMQ-L|
|Output Style:||L||Keyway:||3/16 X 3/32|
|Input Style:||C-face Quill||Output Torque:||614|
|Mounting Style:||Base||Input HP:||3.653|
|Output Shaft Orientation:||L||Overhung Load:||1,000|
|No. of Gear Reductions:||Single||Output Key:||1/4 X 1.44|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Service Factor:||1||Reducer:||Worm - Right Angle|
|Input Bore (C Face):||0.875||Input Quill Diameter (in):||0.875 in|
|Input Diameter (in):||0.875 in||Product Type:||Right Angle|
|Center distance (inch):||2.06||Series:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||BMQ821||Gear Drive Reductions:||Single|
|Input Keyway (C Face):||3/16 x 3/32||Assembly:||BMQ-L|
|Output shaft:||Shaft||Motor HP Rating:||3|
|Input Keyway:||3/16 X 1.38||Output Diameter (in):||1.000 in|
|Shaft Seal Material:||Viton||Gear Type:||Worm|