Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-100-D-56

Catalog #:GRG-BMQ821-100-D-56
Part #:GRG8210144.00
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Available warehouses not found.
Weight:29.00 LB
List Price: $935.00

General Specifications

UPC: 69031003711 Weight: 29.00 LB
Packaged Length: 10.69 Inches Packaged Width: 9.06 Inches
Packaged Height: 10.5 Inches

Technical Specifications

Input RPM: 1,750 Series Type: Cast Iron 800 Worm Gear Reducers
Keyway: 3/16 X 3/32 Frame Size: 56
Mounting Style: No Base Output Torque: 439
Output Shaft Assembly Code: D Output Style: D
Series Style: GRG-BMQ-D Output HP: 0.122
Output Shaft Orientation: D Input Style: C-face Quill
Series Code: GRG Output RPM: 17
Reducer Style: Worm - Right Angle Overhung Load: 1,580
Input HP: 0.217 No. of Gear Reductions: Single
Output Key: 1/4 X 1.44 Input Quill Diameter (in): 0.625 in
Assembly: BMQ-D Model Code: BMQ821
Product Line: GR Series - Ironman Worm Gear Reducers Series: GR Series - Ironman Worm Gear Reducers
Input Diameter (in): 0.625 in Input Bore (C Face): 0.625
Ratio Range: 100:1 to 250:1 Housing material: Cast Iron
Gear Drive Reductions: Single Gear Type: Worm
Center distance (inch): 2.06 Output Diameter (in): 1.000 in
Service Factor: 1 Product Type: Right Angle
Shaft Seal Material: Viton Output shaft: Shaft
Input Keyway (C Face): 3/16 x 3/32 Reducer: Worm - Right Angle
Ratio: 100:1 Output Direction: LR
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.
The following items have been added to your cart: {0}