Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BMQ821-50-D-56

Catalog #:GRG-BMQ821-50-D-56
Part #:GRG8210141.00
  • One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
  • Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
  • Large oil capacity provides positive splash lubrication and superior cooling capability.
  • Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
  • The unique quill seal guard protects the input seal from damage during motor installation.
  • Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
  • Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
  • All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
  • Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
  • Mounting dimensions are interchangeable with most industry standard reducers.
File is not found. Please try again or contact customer service.
Sorry, at this time this product does not comply with the standards of the country you selected.
This product complies with the standards of the country you selected.
The account you are currently on does not have access to purchase this product. Please change to your {0} account to purchase.
The following item(s) have been moved to {0}: {1}
Quantities over {0} may require additional lead time. A Regal representative will contact you if this occurs.
You can only order in multiples of {0}. Please enter a valid quantity for this item.
You have no products selected for comparison. Please select at least two products to compare using the 'Add to Compare' checkbox found on product list pages or product detail pages.
Sorry, this item is no longer available.
Discontinued
Available warehouses not found.
Weight:29 LB
UOM:EA
List Price: $935.00

General Specifications

UPC: 69031003708 Weight: 29 LB

Technical Specifications

Input HP: 0.769 Input Diameter (in): 0.625 in
Service Factor: 1 Series: GR Series - Ironman Worm Gear Reducers
Gear Drive Reductions: Single Output shaft: Shaft
Gear Type: Worm Output RPM: 35
Mounting Style: Base No. of Gear Reductions: Single
Product Line: GR Series - Ironman Worm Gear Reducers Ratio Range: 50:1
Input RPM: 1,750 Ratio: 50:1
Product Type: Right Angle Input Style: C-face Quill
Shaft Seal Material: Viton Series Style: GRG-BMQ-D
Reducer: Worm - Right Angle Housing material: Cast Iron
Center distance (inch): 2.06 Output HP: 0.539
Output Torque: 970 Reducer Style: Worm - Right Angle
Frame Size: 56 Input Bore (C Face): 0.625
Assembly: BMQ-D Overhung Load: 1,385
Output Key: 1/4 x 1.44 Input Keyway (C Face): 3/16 x 3/32
Output Shaft Orientation: D Output Diameter (in): 1.000 in
Model Code: BMQ821 Output Style: D
Output Shaft Assembly Code: D
This name is used, please enter another
{0} was created successfully.
{0} was deleted successfully.
Please select an account
Profile updated successfully.
Thank you for your registration request. We have submitted your information to your company's administrator for review and approval.
You have been logged out due to inactivity. Please log in again.