Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM821-20-L-140
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69||Packaged Width:||9.06|
|Output Key:||1/4 X 1.44||Mounting Style:||Base|
|Output Shaft Assembly Code:||L||Input RPM:||1,750|
|Input Style:||C-Face Coupled||Output HP:||1.338|
|Input HP:||1.584||Output Torque:||964|
|Overhung Load:||1,175||Series Code:||GRG|
|Output RPM:||87||Keyway:||3/16 X 3/32|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Orientation:||L|
|Output Style:||L||No. of Gear Reductions:||Single|
|Frame Size:||140||Reducer Style:||Worm - Right Angle|
|Series Style:||GRG-BM-L||Input Keyway:||3/16 X 1.38|
|Housing material:||Cast Iron||Assembly:||BM-L|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||0.875|
|Ratio Range:||20:1||Gear Type:||Worm|
|Input Diameter (in):||0.875 in||Center distance (inch):||2.06|
|Model Code:||BM821||Output shaft:||Shaft|
|Gear Drive Reductions:||Single||Ratio:||20:1|
|Service Factor:||1||Shaft Seal Material:||Viton|
|Reducer:||Worm - Right Angle||Product Type:||Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Diameter (in):||1.000 in|
|Input Keyway (C Face):||3/16 x 3/32|