Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-BM821-80-R-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GRG-BM-R||Center distance (inch):||2.06|
|Model Code:||BM821||Output shaft:||Shaft|
|Housing material:||Cast Iron||Output Style:||R|
|Service Factor:||1||Output RPM:||21.9|
|Output Torque:||547||No. of Gear Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Output Shaft Orientation:||R||Output Key:||1/4 x 1.44|
|Overhung Load:||1,495||Input Style:||C-Face Coupled|
|Gear Drive Reductions:||Single||Reducer:||Worm - Right Angle|
|Ratio:||80:1||Input Diameter (in):||0.625 in|
|Input HP:||0.304||Input RPM:||1,750|
|Ratio Range:||80:1||Reducer Style:||Worm - Right Angle|
|Output Diameter (in):||1.000 in||Output HP:||0.19|
|Shaft Seal Material:||Viton||Input Keyway (C Face):||3/16 x 3/32|
|Product Type:||Right Angle||Output Shaft Assembly Code:||R|
|Input Bore (C Face):||0.625||Mounting Style:||Base|
|Series:||GR Series - Ironman Worm Gear Reducers|