Grove Gear Cast Iron Single-Reduction Worm Reducer - GRG-B821-100-D
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||10.69||Packaged Width:||9.06|
|Output Style:||D||Output Shaft Orientation:||D|
|Output Torque:||439||Output Key:||1/4 X 1.44|
|Input RPM:||1,750||Input Style:||Shaft|
|Reducer Style:||Worm - Right Angle||Overhung Load:||1,580|
|No. of Gear Reductions:||Single||Mounting Style:||Base|
|Output HP:||0.122||Series Style:||GRG-B-D|
|Output RPM:||17||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Assembly Code:||D||Series Code:||GRG|
|Input HP:||0.217||Product Type:||Right Angle|
|Output Diameter (in):||1.000 in||Ratio Range:||100:1 to 250:1|
|Model Code:||B821||Service Factor:||1|
|Housing material:||Cast Iron||Input Diameter (in):||0.625 in|
|Output shaft:||Shaft||Gear Drive Reductions:||Single|
|Input Keyway:||3/16 X 1.38||Shaft Seal Material:||Viton|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio:||100:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Center distance (inch):||2.06||Assembly:||B-D|
|Reducer:||Worm - Right Angle|