Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ860-15-H1-250-36
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Input Keyway (C Face):||3/8 x 3/16|
|Output Style:||H1||Center distance (inch):||6|
|Overhung Load:||3,723||Input HP:||19.23|
|Shaft Seal Material:||Viton||Reducer:||Worm - Right Angle|
|Output Torque:||9515||Output Shaft Orientation:||H1|
|Input Bore (C Face):||1.625||Assembly:||HMQ-H1|
|Reducer Style:||Worm - Right Angle||Output Shaft Assembly Code:||H1|
|Gear Type:||Worm||Output HP:||17.61|
|Output Key:||1/2 X 4||Gear Drive Reductions:||Single|
|No. of Gear Reductions:||Single||Output Hollow Shaft Diameter (in):||2.250 in|
|Frame Size:||250||Product Type:||Right Angle|
|Input Style:||C-face Quill||Input RPM:||1,750|
|Service Factor:||1||Input Diameter (in):||1.625 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Bore Code:||36|
|Housing material:||Cast Iron||Series Style:||GR-HMQ-H1|
|Output RPM:||116||Output shaft:||Hollow Bore|
|Mounting Style:||Shaft Mount||Model Code:||HMQ860|