Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ860-5-H1-250-55
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio:||5:1||Input Style:||C-face Quill|
|Gear Drive Reductions:||Single||Model Code:||HMQ860|
|Reducer Style:||Worm - Right Angle||Bore Code:||55|
|Output Torque Range:||5000 to 10000 in lbs||Housing material:||Cast Iron|
|Output Torque:||6068||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||350||Frame Size:||250|
|Output Hollow Shaft Diameter (in):||3.438 in||Input Keyway (C Face):||3/8 x 3/16|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Style:||H1|
|Output Shaft Assembly Code:||H1||Mounting Style:||Shaft Mount|
|Center distance (inch):||6||Ratio Range:||5:1|
|Input Bore (C Face):||1.625||HP Range:||30 HP (< 50)|
|Product Type:||Right Angle||No. of Gear Reductions:||Single|
|Output Key:||7/8 X 11/16 X 4||Input RPM:||1,750|
|Center Distance Range:||Above 3.25"||Gear Type:||Worm|
|Series Style:||GR-HMQ-H1||Input Diameter (in):||1.625 in|
|Output Shaft Orientation:||H1||Shaft Seal Material:||Viton|
|Service Factor:||1||Input HP:||35.1|
|Output shaft:||Hollow Bore|