Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ860-25-H1-210-47
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Assembly:||HMQ-H1||Output shaft:||Hollow Bore|
|Mounting Style:||Shaft Mount||Overhung Load:||3,723|
|Series:||GR Series - Ironman Worm Gear Reducers||Model Code:||HMQ860|
|Output RPM:||70||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||6||Bore Code:||47|
|Input RPM:||1,750||Input Keyway (C Face):||5/16 x 5/32|
|Series Style:||GR-HMQ-H1||Housing material:||Cast Iron|
|No. of Gear Reductions:||Single||Gear Drive Reductions:||Single|
|Output Shaft Orientation:||H1||Input HP:||13.06|
|Input Style:||C-face Quill||Product Type:||Right Angle|
|Output Torque:||10245||Output Style:||H1|
|Service Factor:||1||Shaft Seal Material:||Viton|
|Reducer Style:||Worm - Right Angle||Frame Size:||210|
|Output Shaft Assembly Code:||H1||Input Bore (C Face):||1.375|
|Output Key:||3/4 X 4||Ratio Range:||25:1|
|Reducer:||Worm - Right Angle||Input Diameter (in):||1.375 in|
|Output Hollow Shaft Diameter (in):||2.938 in||Gear Type:||Worm|