Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM860-15-H1-250-55
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Keyway:||3/8 x 3/16||Gear Drive Reductions:||Single|
|Service Factor:||1||Input Bore (C Face):||1.625|
|Shaft Seal Material:||Viton||No. of Gear Reductions:||Single|
|Gear Type:||Worm||Output RPM:||116|
|Output shaft:||Hollow Bore||Series:||GR Series - Ironman Worm Gear Reducers|
|Overhung Load:||3,723||Mounting Style:||Shaft Mount|
|Ratio Range:||15:1||Model Code:||HM860|
|Output Shaft Assembly Code:||H1||Output Key:||7/8 X 11/16 X 4|
|Product Type:||Right Angle||Assembly:||HM-H1|
|Output Hollow Shaft Diameter (in):||3.438 in||Frame Size:||250|
|Input HP:||19.23||Input Style:||C-Face Coupled|
|Output Torque:||9515||Output HP:||17.61|
|Output Shaft Orientation:||H1||Reducer:||Worm - Right Angle|
|Housing material:||Cast Iron||Input Diameter (in):||1.625 in|
|Center distance (inch):||6||Bore Code:||55|
|Series Style:||GR-HM-H1||Reducer Style:||Worm - Right Angle|
|Output Style:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|