Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-15-D-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-face Quill||Output HP:||17.61|
|Center distance (inch):||6||Input Keyway (C Face):||3/8 x 3/16|
|Input HP:||19.23||Series Style:||GR-BMQ-D|
|Product Type:||Right Angle||Output Style:||D|
|Ratio Range:||15:1||Gear Drive Reductions:||Single|
|Input Bore (C Face):||1.625||Reducer:||Worm - Right Angle|
|Output RPM:||116||Output Torque:||9515|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Input RPM:||1,750||No. of Gear Reductions:||Single|
|Output shaft:||Shaft||Output Diameter (in):||2.500 in|
|Output Shaft Assembly Code:||D||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Output Shaft Orientation:||D|
|Overhung Load:||3,723||Frame Size:||250|
|Input Diameter (in):||1.625 in||Mounting Style:||Base|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio:||15:1|
|Reducer Style:||Worm - Right Angle||Assembly:||BMQ-D|
|Output Key:||5/8 X 4.00||Model Code:||BMQ860|