Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-5-L-250
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Orientation:||L||Output HP:||33.7|
|No. of Gear Reductions:||Single||Mounting Style:||Base|
|Series Style:||GR-BMQ-L||Output RPM:||350|
|Output Shaft Assembly Code:||L||Input Keyway (C Face):||3/8 x 3/16|
|Output Torque Range:||5000 to 10000 in lbs||Input HP:||35.1|
|Input Diameter (in):||1.625 in||Center distance (inch):||6|
|Service Factor:||1||Output Style:||L|
|Ratio Range:||5:1||Output shaft:||Shaft|
|Product Type:||Right Angle||Gear Type:||Worm|
|Shaft Seal Material:||Viton||Input RPM:||1,750|
|Input Style:||C-face Quill||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Key:||5/8 X 4.00||HP Range:||30 HP (< 50)|
|Gear Drive Reductions:||Single||Reducer Style:||Worm - Right Angle|
|Model Code:||BMQ860||Input Bore (C Face):||1.625|
|Output Torque:||6068||Output Diameter (in):||2.500 in|
|Housing material:||Cast Iron||Series:||GR Series - Ironman Worm Gear Reducers|
|Center Distance Range:||Above 3.25"||Assembly:||BMQ-L|