Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-20-D-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||Gear Drive Reductions:||Single|
|Gear Type:||Worm||Output Style:||D|
|Input Style:||C-face Quill||Mounting Style:||Base|
|Frame Size:||210||Output RPM:||87|
|Input Diameter (in):||1.375 in||Reducer:||Worm - Right Angle|
|Series Style:||GR-BMQ-D||Input Bore (C Face):||1.375|
|Input HP:||15.71||Ratio Range:||20:1|
|Series:||GR Series - Ironman Worm Gear Reducers||Output HP:||14.06|
|Output Shaft Orientation:||D||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||20:1||Product Type:||Right Angle|
|Shaft Seal Material:||Viton||No. of Gear Reductions:||Single|
|Service Factor:||1||Center distance (inch):||6|
|Output Shaft Assembly Code:||D||Output Key:||5/8 X 4.00|
|Output Torque:||10127||Output Diameter (in):||2.500 in|
|Reducer Style:||Worm - Right Angle||Model Code:||BMQ860|
|Housing material:||Cast Iron||Input Keyway (C Face):||5/16 x 5/32|
|Overhung Load:||3,723||Output shaft:||Shaft|