Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-50-L-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||L||Housing material:||Cast Iron|
|Output RPM:||35||Frame Size:||210|
|Output Shaft Orientation:||L||Assembly:||BMQ-L|
|Ratio Range:||50:1||Input RPM:||1,750|
|Service Factor:||1||Output HP:||5.597|
|Input Style:||C-face Quill||Input HP:||7.242|
|Input Keyway (C Face):||5/16 x 5/32||Output Style:||L|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Torque:||10079|
|No. of Gear Reductions:||Single||Input Diameter (in):||1.375 in|
|Gear Drive Reductions:||Single||Model Code:||BMQ860|
|Gear Type:||Worm||Mounting Style:||Base|
|Input Bore (C Face):||1.375||Product Type:||Right Angle|
|Output Key:||5/8 X 4.00||Output shaft:||Shaft|
|Output Diameter (in):||2.500 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||6||Reducer Style:||Worm - Right Angle|
|Series Style:||GR-BMQ-L||Shaft Seal Material:||Viton|
|Ratio:||50:1||Reducer:||Worm - Right Angle|