Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-50-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input RPM:||1,750||Center distance (inch):||6|
|Input HP:||7.242||Overhung Load:||3,723|
|Output HP:||5.597||No. of Gear Reductions:||Single|
|Output Torque:||10079||Housing material:||Cast Iron|
|Output Diameter (in):||2.500 in||Model Code:||BMQ860|
|Assembly:||BMQ-D||Shaft Seal Material:||Viton|
|Product Type:||Right Angle||Gear Drive Reductions:||Single|
|Input Keyway (C Face):||1/4 x 1/8||Output shaft:||Shaft|
|Reducer:||Worm - Right Angle||Mounting Style:||Base|
|Input Bore (C Face):||1.125||Output Shaft Orientation:||D|
|Series:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||50:1|
|Output Key:||5/8 X 4.00||Frame Size:||180|
|Input Style:||C-face Quill||Output Shaft Assembly Code:||D|
|Output RPM:||35||Series Style:||GR-BMQ-D|
|Reducer Style:||Worm - Right Angle||Service Factor:||1|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Diameter (in):||1.125 in|