Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-80-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Type:||Worm||Gear Drive Reductions:||Single|
|Frame Size:||180||Input HP:||3.702|
|Model Code:||BMQ860||Output shaft:||Shaft|
|Output Key:||5/8 X 4.00||Ratio:||80:1|
|Output Shaft Assembly Code:||R||Assembly:||BMQ-R|
|Input Bore (C Face):||1.125||Reducer Style:||Worm - Right Angle|
|Service Factor:||1||Input Style:||C-face Quill|
|Reducer:||Worm - Right Angle||Output RPM:||21|
|Shaft Seal Material:||Viton||Overhung Load:||3,723|
|Output Shaft Orientation:||R||Mounting Style:||Base|
|Output Diameter (in):||2.500 in||Input Diameter (in):||1.125 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output HP:||2.522|
|Ratio Range:||80:1||Housing material:||Cast Iron|
|Output Torque:||7264||Center distance (inch):||6|
|Series Style:||GR-BMQ-R||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Style:||R||No. of Gear Reductions:||Single|
|Input RPM:||1,750||Input Keyway (C Face):||1/4 x 1/8|
|Product Type:||Right Angle|