Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ860-50-L-140
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Diameter (in):||0.875 in||Ratio Range:||50:1|
|Housing material:||Cast Iron||Ratio:||50:1|
|Shaft Seal Material:||Viton||Mounting Style:||Base|
|Overhung Load:||3,723||No. of Gear Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output Shaft Orientation:||L|
|Output HP:||5.597||Input Bore (C Face):||0.875|
|Model Code:||BMQ860||Output Diameter (in):||2.500 in|
|Output RPM:||35||Service Factor:||1|
|Input Style:||C-face Quill||Frame Size:||140|
|Reducer:||Worm - Right Angle||Reducer Style:||Worm - Right Angle|
|Output Style:||L||Input Keyway (C Face):||3/16 x 3/32|
|Output Key:||5/8 X 4.00||Product Type:||Right Angle|
|Output Shaft Assembly Code:||L||Series:||GR Series - Ironman Worm Gear Reducers|
|Gear Drive Reductions:||Single||Gear Type:||Worm|
|Output Torque:||10079||Input RPM:||1,750|
|Center distance (inch):||6||Output shaft:||Shaft|