Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BM860-60-R-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output shaft:||Shaft||Output HP:||4.539|
|Service Factor:||1||Input Bore (C Face):||1.375|
|Frame Size:||210||Reducer Style:||Worm - Right Angle|
|Overhung Load:||3,723||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Output Style:||R|
|Housing material:||Cast Iron||Mounting Style:||Base|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||1.375 in||Input Keyway (C Face):||5/16 x 5/32|
|Center distance (inch):||6||Series Style:||GR-BM-R|
|Output RPM:||29||Output Shaft Assembly Code:||R|
|Reducer:||Worm - Right Angle||Input RPM:||1,750|
|Gear Drive Reductions:||Single||Model Code:||BM860|
|Output Diameter (in):||2.500 in||Product Type:||Right Angle|
|Ratio:||60:1||No. of Gear Reductions:||Single|
|Input HP:||6.152||Output Torque:||9808|
|Input Style:||C-Face Coupled||Output Key:||5/8 X 4.00|
|Assembly:||BM-R||Output Shaft Orientation:||R|