Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B860-60-R
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40 Inches||Packaged Width:||37 Inches|
|Packaged Height:||22.5 Inches|
|Output HP:||4.539||Output RPM:||29|
|Input RPM:||1,750||Series Style:||GR-B|
|No. of Gear Reductions:||Single||Output Style:||Solid Shaft|
|Input HP:||6.152||Overhung Load:||3,723|
|Output Torque:||9808||Series Code:||GR|
|Output Shaft Assembly Code:||B-R||Input Style:||Shaft|
|Reducer Style:||Worm - Right Angle||Output Key:||5/8 X 4.00|
|Mounting Style:||Base||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Shaft Orientation:||R||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio:||60:1||Center distance (inch):||6|
|Ratio Range:||60:1||Output shaft:||Shaft|
|Housing material:||Cast Iron||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Gear Type:||Worm||Product Type:||Right Angle|
|Input Keyway:||3/8 X 3.00||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single|