Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-B860-60-L
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Packaged Length:||40 Inches||Packaged Width:||37 Inches|
|Packaged Height:||22.5 Inches|
|Reducer Style:||Worm - Right Angle||Series Code:||GR|
|No. of Gear Reductions:||Single||Output Shaft Orientation:||L|
|Output Key:||5/8 X 4.00||Input HP:||6.152|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Shaft Assembly Code:||B-L|
|Mounting Style:||Base||Output Style:||Solid Shaft|
|Output RPM:||29||Output Torque:||9808|
|Series Style:||GR-B||Output HP:||4.539|
|Input RPM:||1,750||Input Style:||Shaft|
|Overhung Load:||3,723||Housing material:||Cast Iron|
|Gear Type:||Worm||Reducer:||Worm - Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Input Keyway:||3/8 X 3.00|
|Center distance (inch):||6||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Gear Drive Reductions:||Single||Output shaft:||Shaft|
|Product Type:||Right Angle||Ratio Range:||60:1|