Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-20-H1-250-55
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Product Type:||Right Angle||Output Style:||H1|
|Gear Drive Reductions:||Single||Frame Size:||250|
|No. of Gear Reductions:||Single||Housing material:||Cast Iron|
|Ratio:||20:1||Output Shaft Orientation:||H1|
|Reducer:||Worm - Right Angle||Output HP:||12.98|
|Ratio Range:||20:1||Input Bore (C Face):||1.625|
|Center distance (inch):||5.25||Model Code:||HMQ852|
|Input Keyway (C Face):||3/8 x 3/16||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Overhung Load:||3,560|
|Service Factor:||1||Reducer Style:||Worm - Right Angle|
|Input HP:||15.56||Input Diameter (in):||1.625 in|
|Output RPM:||87||Series Style:||GR-HMQ-H1|
|Input RPM:||1,750||Output Hollow Shaft Diameter (in):||3.438 in|
|Mounting Style:||Shaft Mount||Assembly:||HMQ-H1|
|Bore Code:||55||Output Key:||7/8 X 11/16 X 4|
|Output Shaft Assembly Code:||H1||Input Style:||C-face Quill|
|Output Torque:||9351||Output shaft:||Hollow Bore|
|Shaft Seal Material:||Viton||Series:||GR Series - Ironman Worm Gear Reducers|