Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-10-H1-250-43
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Ratio:||10:1||Gear Drive Reductions:||Single|
|Assembly:||HMQ-H1||Input Keyway (C Face):||3/8 x 3/16|
|Frame Size:||250||Ratio Range:||10:1|
|Output Shaft Assembly Code:||H1||Input RPM:||1,750|
|Center distance (inch):||5.25||No. of Gear Reductions:||Single|
|Input Style:||C-face Quill||Series Style:||GR-HMQ-H1|
|Output Shaft Orientation:||H1||Overhung Load:||3,370|
|Reducer:||Worm - Right Angle||Output Hollow Shaft Diameter (in):||2.688 in|
|Mounting Style:||Shaft Mount||Product Type:||Right Angle|
|Output Style:||H1||Shaft Seal Material:||Viton|
|Input HP:||23.15||Service Factor:||1|
|Output Torque:||7827||Output HP:||21.73|
|Reducer Style:||Worm - Right Angle||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Bore Code:||43||Output shaft:||Hollow Bore|
|Model Code:||HMQ852||Output RPM:||175|
|Housing material:||Cast Iron||Gear Type:||Worm|
|Input Diameter (in):||1.625 in||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||1.625||Output Key:||5/8 X 4|