Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-10-H1-250-36
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series:||GR Series - Ironman Worm Gear Reducers||Housing material:||Cast Iron|
|Input Keyway (C Face):||3/8 x 3/16||Output Key:||1/2 X 4|
|Assembly:||HMQ-H1||Mounting Style:||Shaft Mount|
|Series Style:||GR-HMQ-H1||Input RPM:||1,750|
|Gear Drive Reductions:||Single||Output Shaft Orientation:||H1|
|Output shaft:||Hollow Bore||Model Code:||HMQ852|
|Gear Type:||Worm||Output Style:||H1|
|Input HP:||23.15||Product Type:||Right Angle|
|Overhung Load:||3,370||Output Shaft Assembly Code:||H1|
|Output RPM:||175||Output HP:||21.73|
|Service Factor:||1||No. of Gear Reductions:||Single|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Frame Size:||250|
|Reducer:||Worm - Right Angle||Center distance (inch):||5.25|
|Ratio:||10:1||Input Diameter (in):||1.625 in|
|Input Style:||C-face Quill||Ratio Range:||10:1|
|Output Hollow Shaft Diameter (in):||2.250 in||Output Torque:||7827|
|Shaft Seal Material:||Viton||Bore Code:||36|
|Reducer Style:||Worm - Right Angle||Input Bore (C Face):||1.625|