Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-5-H1-250-40
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output HP:||31.17||Input HP:||32.51|
|Gear Drive Reductions:||Single||Model Code:||HMQ852|
|Series Style:||GR-HMQ-H1||Center distance (inch):||5.25|
|Series:||GR Series - Ironman Worm Gear Reducers||Output RPM:||350|
|Reducer:||Worm - Right Angle||Frame Size:||250|
|Overhung Load:||3,100||Product Type:||Right Angle|
|Bore Code:||40||Mounting Style:||Shaft Mount|
|Input Style:||C-face Quill||Housing material:||Cast Iron|
|Ratio:||5:1||Output Shaft Assembly Code:||H1|
|Shaft Seal Material:||Viton||Output Style:||H1|
|Reducer Style:||Worm - Right Angle||Gear Type:||Worm|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input RPM:||1,750|
|Input Bore (C Face):||1.625||Output Torque:||5753|
|Output shaft:||Hollow Bore||Input Keyway (C Face):||3/8 x 3/16|
|Input Diameter (in):||1.625 in||Ratio Range:||5:1|
|Output Shaft Orientation:||H1||No. of Gear Reductions:||Single|
|Output Hollow Shaft Diameter (in):||2.500 in||Output Key:||5/8 X 4|