Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-15-H1-210-47
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Type:||Cast Iron 800 Worm Gear Reducers||Input HP:||18.11|
|Reducer Style:||Worm - Right Angle||Frame Size:||210|
|Output Shaft Orientation:||H1||Output Shaft Assembly Code:||H1|
|Output RPM:||116||Keyway:||5/16 X 5/32|
|Input Style:||C-face Quill||Output Style:||H1|
|Series Code:||GR||Mounting Style:||Shaft Mount|
|Output Key:||3/4 X 4||Bore Code:||47|
|Output Torque:||8941||Input RPM:||1,750|
|Series Style:||GR-HMQ-H1||Output HP:||16.55|
|Gear Type:||Worm||Input Bore (C Face):||1.375|
|Ratio Range:||15:1||Gear Drive Reductions:||Single|
|Center distance (inch):||5.25||Input Diameter (in):||1.375 in|
|Input Keyway (C Face):||5/16 x 5/32||Housing material:||Cast Iron|
|Output Hollow Shaft Diameter (in):||2.938 in||Reducer:||Worm - Right Angle|
|Series:||GR Series - Ironman Worm Gear Reducers||Model Code:||HMQ852|
|Service Factor:||1||Shaft Seal Material:||Viton|
|No. of Gear Reductions:||Single||Product Type:||Right Angle|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Output shaft:||Hollow Bore|
|Input Quill Diameter (in):||1.375 in||Assembly:||HMQ-H1|