Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-60-H1-180-43
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Model Code:||HMQ852||Mounting Style:||Shaft Mount|
|Input Bore (C Face):||1.125||Frame Size:||180|
|Ratio Range:||60:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Ratio:||60:1|
|Input HP:||5.816||Output Style:||H1|
|Bore Code:||43||Gear Type:||Worm|
|Input Style:||C-face Quill||Assembly:||HMQ-H1|
|Output Key:||5/8 X 4||Input RPM:||1,750|
|Housing material:||Cast Iron||Product Type:||Right Angle|
|Overhung Load:||3,570||Gear Drive Reductions:||Single|
|Output RPM:||29||Output Hollow Shaft Diameter (in):||2.688 in|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Torque:||9212|
|Series Style:||GR-HMQ-H1||Output Shaft Orientation:||H1|
|No. of Gear Reductions:||Single||Input Diameter (in):||1.125 in|
|Service Factor:||1||Reducer Style:||Worm - Right Angle|
|Shaft Seal Material:||Viton||Output Shaft Assembly Code:||H1|
|Output shaft:||Hollow Bore||Input Keyway (C Face):||1/4 x 1/8|
|Center distance (inch):||5.25||Output HP:||4.263|