Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-40-H1-180-55
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Shaft Assembly Code:||H1||Output Torque:||9419|
|Keyway:||1/4 X 1/8||Series Code:||GR|
|Mounting Style:||Shaft Mount||Reducer Style:||Worm - Right Angle|
|Series Style:||GR-HMQ-H1||Output Key:||7/8 X 11/16 X 4|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output RPM:||43|
|Output Style:||H1||Input Style:||C-face Quill|
|Output Shaft Orientation:||H1||Input HP:||8.105|
|Input RPM:||1,750||Frame Size:||180|
|Output HP:||6.538||Bore Code:||55|
|Ratio:||40:1||Input Bore (C Face):||1.125|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Input Quill Diameter (in):||1.125 in||Housing material:||Cast Iron|
|Model Code:||HMQ852||Output Hollow Shaft Diameter (in):||3.438 in|
|Gear Type:||Worm||Output shaft:||Hollow Bore|
|Input Keyway (C Face):||1/4 x 1/8||No. of Gear Reductions:||Single|
|Input Diameter (in):||1.125 in||Service Factor:||1|
|Shaft Seal Material:||Viton||Center distance (inch):||5.25|
|Product Type:||Right Angle||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single|