Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-20-H1-180-47
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Diameter (in):||1.125 in||Reducer:||Worm - Right Angle|
|Output Shaft Assembly Code:||H1||Gear Type:||Worm|
|Product Type:||Right Angle||Output Key:||3/4 X 4|
|Ratio Range:||20:1||Shaft Seal Material:||Viton|
|Bore Code:||47||Input Bore (C Face):||1.125|
|No. of Gear Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Housing material:||Cast Iron||Service Factor:||1|
|Frame Size:||180||Output HP:||12.98|
|Input HP:||15.56||Center distance (inch):||5.25|
|Gear Drive Reductions:||Single||Mounting Style:||Shaft Mount|
|Output Hollow Shaft Diameter (in):||2.938 in||Input RPM:||1,750|
|Output Torque:||9351||Output Style:||H1|
|Output Shaft Orientation:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output shaft:||Hollow Bore||Overhung Load:||3,560|
|Input Style:||C-face Quill||Reducer Style:||Worm - Right Angle|
|Input Keyway (C Face):||1/4 x 1/8||Series Style:||GR-HMQ-H1|