Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-15-H1-180-47
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Mounting Style:||Shaft Mount||Input Bore (C Face):||1.125|
|Ratio:||15:1||Output Hollow Shaft Diameter (in):||2.938 in|
|Output Shaft Assembly Code:||H1||Bore Code:||47|
|Output shaft:||Hollow Bore||Input Diameter (in):||1.125 in|
|Input Style:||C-face Quill||Overhung Load:||3,560|
|Frame Size:||180||Output Key:||3/4 X 4|
|Reducer Style:||Worm - Right Angle||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Ratio Range:||15:1|
|Input HP:||18.11||Series Style:||GR-HMQ-H1|
|Shaft Seal Material:||Viton||Output Style:||H1|
|Input Keyway (C Face):||1/4 x 1/8||Product Type:||Right Angle|
|Input RPM:||1,750||Gear Type:||Worm|
|Output Shaft Orientation:||H1||Gear Drive Reductions:||Single|
|Model Code:||HMQ852||Series:||GR Series - Ironman Worm Gear Reducers|
|Reducer:||Worm - Right Angle||Output RPM:||116|
|Service Factor:||1||Center distance (inch):||5.25|
|Output Torque:||8941||No. of Gear Reductions:||Single|