Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HMQ852-80-H1-140-43
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Hollow Shaft Diameter (in):||2.688 in||Input Style:||C-face Quill|
|Input RPM:||1,750||Reducer:||Worm - Right Angle|
|Output HP:||1.902||Center distance (inch):||5.25|
|Ratio:||80:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Torque:||5478||Gear Drive Reductions:||Single|
|Frame Size:||140||Input Diameter (in):||0.875 in|
|Housing material:||Cast Iron||Output shaft:||Hollow Bore|
|Bore Code:||43||Series Style:||GR-HMQ-H1|
|Mounting Style:||Shaft Mount||Output Style:||H1|
|Overhung Load:||3,590||Ratio Range:||80:1|
|Input HP:||2.906||Shaft Seal Material:||Viton|
|Service Factor:||1||Output Key:||5/8 X 4|
|Gear Type:||Worm||Reducer Style:||Worm - Right Angle|
|Input Keyway (C Face):||3/16 x 3/32||Series:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||HMQ852||No. of Gear Reductions:||Single|
|Input Bore (C Face):||0.875||Output Shaft Assembly Code:||H1|
|Product Type:||Right Angle||Output Shaft Orientation:||H1|