Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM852-10-H1-250-48
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Style:||C-Face Coupled||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Input Bore (C Face):||1.625|
|Reducer Style:||Worm - Right Angle||Input RPM:||1,750|
|Input HP:||23.15||Output Key:||3/4 x 4|
|Model Code:||HM852||Output Shaft Orientation:||H1|
|Service Factor:||1||Output RPM:||175|
|Output Hollow Shaft Diameter (in):||3.000 in||Output Style:||H1|
|Input Keyway:||3/8 x 3/16||Center distance (inch):||5.25|
|Input Diameter (in):||1.625 in||Output Shaft Assembly Code:||H1|
|Mounting Style:||Shaft Mount||Series Style:||GR-HM-H1|
|Product Type:||Right Angle||Ratio:||10:1|
|Output shaft:||Hollow Bore||Ratio Range:||10:1|
|Bore Code:||48||Reducer:||Worm - Right Angle|
|Output HP:||21.73||Gear Drive Reductions:||Single|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Output Torque:||7827|
|Shaft Seal Material:||Viton||Frame Size:||250|