Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-HM852-15-H1-210-55
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Bore (C Face):||1.375||Service Factor:||1|
|Reducer:||Worm - Right Angle||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Input HP:||18.11|
|Bore Code:||55||Output HP:||16.55|
|Ratio Range:||15:1||Input Keyway (C Face):||5/16 x 5/32|
|Center distance (inch):||5.25||Assembly:||HM-H1|
|Frame Size:||210||Input Style:||C-Face Coupled|
|Input RPM:||1,750||Series:||GR Series - Ironman Worm Gear Reducers|
|Output RPM:||116||Output Shaft Orientation:||H1|
|Model Code:||HM852||Series Style:||GR-HM-H1|
|Gear Type:||Worm||Output Key:||7/8 X 11/16 X 4|
|Output Shaft Assembly Code:||H1||Mounting Style:||Shaft Mount|
|Output Style:||H1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Output Hollow Shaft Diameter (in):||3.438 in||Housing material:||Cast Iron|
|Overhung Load:||3,560||Input Diameter (in):||1.375 in|
|Output shaft:||Hollow Bore||Shaft Seal Material:||Viton|
|Reducer Style:||Worm - Right Angle||No. of Gear Reductions:||Single|