Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-H852-5-H1-55
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Hollow Shaft Diameter (in):||3.438 in||Input Diameter (in):||1.25 in|
|Center distance (inch):||5.25||Output Shaft Assembly Code:||H1|
|Input HP:||32.51||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||H852||Input Keyway:||1/4 X 3.00|
|Housing material:||Cast Iron||Output HP:||31.17|
|Output Shaft Orientation:||H1||Reducer Style:||Worm - Right Angle|
|Output Torque:||5753||Gear Drive Reductions:||Single|
|Product Type:||Right Angle||Gear Type:||Worm|
|Output Style:||H1||Output Key:||7/8 X 11/16 X 4|
|Series Style:||GR-H-H1||Output RPM:||350|
|Shaft Seal Material:||Viton||Output shaft:||Hollow Bore|
|Input Style:||Shaft||Mounting Style:||Shaft Mount|
|Service Factor:||1||No. of Gear Reductions:||Single|
|Bore Code:||55||Input RPM:||1,750|
|Reducer:||Worm - Right Angle||Series:||GR Series - Ironman Worm Gear Reducers|
|Overhung Load:||3,100||Ratio Range:||5:1|