Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-10-D-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|No. of Gear Reductions:||Single||Assembly:||BMQ-D|
|Ratio:||10:1||Center distance (inch):||5.25|
|Model Code:||BMQ852||Input Bore (C Face):||1.625|
|Output shaft:||Shaft||Output RPM:||175|
|Output Torque:||7827||Overhung Load:||3,370|
|Housing material:||Cast Iron||Input Style:||C-face Quill|
|Output Key:||1/2 X 3.50||Product Type:||Right Angle|
|Ratio Range:||10:1||Reducer:||Worm - Right Angle|
|Input HP:||23.15||Series:||GR Series - Ironman Worm Gear Reducers|
|Output Diameter (in):||2.000 in||Mounting Style:||Base|
|Reducer Style:||Worm - Right Angle||Series Style:||GR-BMQ-D|
|Output Style:||D||Output HP:||21.73|
|Input RPM:||1,750||Input Diameter (in):||1.625 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Gear Drive Reductions:||Single|
|Output Shaft Orientation:||D||Shaft Seal Material:||Viton|
|Input Keyway (C Face):||3/8 x 3/16||Frame Size:||250|
|Service Factor:||1||Gear Type:||Worm|
|Output Shaft Assembly Code:||D|