Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-25-L-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Service Factor:||1||Output RPM:||70|
|Reducer:||Worm - Right Angle||Input Keyway (C Face):||3/8 x 3/16|
|Output shaft:||Shaft||Housing material:||Cast Iron|
|Model Code:||BMQ852||Product Type:||Right Angle|
|Output Style:||L||Input Bore (C Face):||1.625|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Frame Size:||250|
|No. of Gear Reductions:||Single||Input Style:||C-face Quill|
|Output Key:||1/2 X 3.50||Reducer Style:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Ratio Range:||25:1|
|Output Shaft Assembly Code:||L||Series Style:||GR-BMQ-L|
|Series:||GR Series - Ironman Worm Gear Reducers||Shaft Seal Material:||Viton|
|Input Diameter (in):||1.625 in||Output HP:||10.57|
|Gear Type:||Worm||Input RPM:||1,750|
|Output Shaft Orientation:||L||Output Torque:||9517|
|Mounting Style:||Base||Center distance (inch):||5.25|
|Output Diameter (in):||2.000 in||Input HP:||12.19|