Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-5-L-250
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Keyway:||3/8 X 3/16||Series Style:||GR-BMQ-L|
|Series Code:||GR||Output Shaft Assembly Code:||L|
|Overhung Load:||3,100||Input Style:||C-face Quill|
|Output Key:||1/2 X 3.50||Frame Size:||250|
|Output HP:||31.17||Input RPM:||1,750|
|Output Torque:||5753||Series Type:||Cast Iron 800 Worm Gear Reducers|
|No. of Gear Reductions:||Single||Input HP:||32.51|
|Output Style:||L||Output Shaft Orientation:||L|
|Reducer Style:||Worm - Right Angle||Mounting Style:||Base|
|Output RPM:||350||Shaft Seal Material:||Viton|
|Output Diameter (in):||2.000 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Assembly:||BMQ-L||Center distance (inch):||5.25|
|Output shaft:||Shaft||Ratio Range:||5:1|
|Reducer:||Worm - Right Angle||Gear Type:||Worm|
|Housing material:||Cast Iron||Service Factor:||1|
|Gear Drive Reductions:||Single||Input Quill Diameter (in):||1.625 in|
|Ratio:||5:1||Product Type:||Right Angle|
|Input Diameter (in):||1.625 in||Input Keyway (C Face):||3/8 x 3/16|
|Model Code:||BMQ852||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Bore (C Face):||1.625|