Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-30-D-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Overhung Load:||3,560||Product Type:||Right Angle|
|Output Torque:||9627||Input Bore (C Face):||1.375|
|Input HP:||10.538||Gear Drive Reductions:||Single|
|Output RPM:||58||Input Diameter (in):||1.375 in|
|Shaft Seal Material:||Viton||Ratio Range:||30:1|
|Assembly:||BMQ-D||Output Diameter (in):||2.000 in|
|No. of Gear Reductions:||Single||Gear Type:||Worm|
|Ratio:||30:1||Output Shaft Assembly Code:||D|
|Output Shaft Orientation:||D||Series Style:||GR-BMQ-D|
|Housing material:||Cast Iron||Input RPM:||1,750|
|Series:||GR Series - Ironman Worm Gear Reducers||Reducer Style:||Worm - Right Angle|
|Output shaft:||Shaft||Reducer:||Worm - Right Angle|
|Model Code:||BMQ852||Center distance (inch):||5.25|
|Output HP:||8.91||Mounting Style:||Base|
|Output Key:||1/2 X 3.50||Output Style:||D|
|Input Style:||C-face Quill||Input Keyway (C Face):||5/16 x 5/32|
|Frame Size:||210||Product Line:||GR Series - Ironman Worm Gear Reducers|