Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-10-D-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Gear Type:||Worm||Output Style:||D|
|Output Shaft Orientation:||D||Series Style:||GR-BMQ-D|
|Output Diameter (in):||2.000 in||Output HP:||21.73|
|Output Shaft Assembly Code:||D||Reducer:||Worm - Right Angle|
|Input Bore (C Face):||1.375||Assembly:||BMQ-D|
|Service Factor:||1||Input Style:||C-face Quill|
|Series:||GR Series - Ironman Worm Gear Reducers||Input HP:||23.15|
|Output shaft:||Shaft||Frame Size:||210|
|Reducer Style:||Worm - Right Angle||Model Code:||BMQ852|
|Housing material:||Cast Iron||Input RPM:||1,750|
|Output Key:||1/2 X 3.50||Gear Drive Reductions:||Single|
|Overhung Load:||3,370||Ratio Range:||10:1|
|Input Diameter (in):||1.375 in||Output RPM:||175|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Product Type:||Right Angle|
|Center distance (inch):||5.25||Shaft Seal Material:||Viton|
|Output Torque:||7827||No. of Gear Reductions:||Single|
|Input Keyway (C Face):||5/16 x 5/32|