Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-10-R-210
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||23.15||Output Shaft Orientation:||R|
|Series Code:||GR||Output HP:||21.73|
|No. of Gear Reductions:||Single||Output Torque:||7827|
|Series Style:||GR-BMQ-R||Overhung Load:||3,370|
|Output Style:||R||Mounting Style:||Base|
|Input RPM:||1,750||Output RPM:||175|
|Keyway:||5/16 X 5/32||Frame Size:||210|
|Input Style:||C-face Quill||Output Key:||1/2 X 3.50|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Reducer Style:||Worm - Right Angle|
|Output Shaft Assembly Code:||R||Housing material:||Cast Iron|
|Model Code:||BMQ852||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||10:1||Output shaft:||Shaft|
|Assembly:||BMQ-R||Output Diameter (in):||2.000 in|
|Product Type:||Right Angle||Input Keyway (C Face):||5/16 x 5/32|
|Input Quill Diameter (in):||1.375 in||Service Factor:||1|
|Shaft Seal Material:||Viton||Input Bore (C Face):||1.375|
|Gear Type:||Worm||Reducer:||Worm - Right Angle|
|Center distance (inch):||5.25||Ratio:||10:1|
|Gear Drive Reductions:||Single||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Diameter (in):||1.375 in|