Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-100-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||180||Input Style:||C-face Quill|
|Output shaft:||Shaft||Input Keyway (C Face):||1/4 x 1/8|
|Overhung Load:||3,600||Output Shaft Assembly Code:||D|
|Assembly:||BMQ-D||Shaft Seal Material:||Viton|
|Input Bore (C Face):||1.125||Reducer Style:||Worm - Right Angle|
|Input HP:||2.072||Housing material:||Cast Iron|
|Input Diameter (in):||1.125 in||Input RPM:||1,750|
|Output HP:||1.291||Reducer:||Worm - Right Angle|
|Output Torque:||4646||Output Key:||1/2 X 3.50|
|Series:||GR Series - Ironman Worm Gear Reducers||Output Shaft Orientation:||D|
|Center distance (inch):||5.25||No. of Gear Reductions:||Single|
|Product Type:||Right Angle||Ratio:||100:1|
|Service Factor:||1||Output Style:||D|
|Ratio Range:||100:1 to 250:1||Gear Type:||Worm|
|Output Diameter (in):||2.000 in||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Mounting Style:||Base||Output RPM:||17|
|Series Style:||GR-BMQ-D||Gear Drive Reductions:||Single|