Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-20-D-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||15.56||Output RPM:||87|
|Reducer:||Worm - Right Angle||Input Keyway (C Face):||1/4 x 1/8|
|Housing material:||Cast Iron||Output HP:||12.98|
|Input RPM:||1,750||Center distance (inch):||5.25|
|Gear Drive Reductions:||Single||Output Torque:||9351|
|Shaft Seal Material:||Viton||Frame Size:||180|
|Reducer Style:||Worm - Right Angle||Input Style:||C-face Quill|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Overhung Load:||3,560|
|No. of Gear Reductions:||Single||Input Diameter (in):||1.125 in|
|Model Code:||BMQ852||Output Shaft Orientation:||D|
|Series:||GR Series - Ironman Worm Gear Reducers||Gear Type:||Worm|
|Service Factor:||1||Output Style:||D|
|Output Key:||1/2 X 3.50||Ratio Range:||20:1|
|Product Type:||Right Angle||Output shaft:||Shaft|
|Output Diameter (in):||2.000 in||Assembly:||BMQ-D|
|Input Bore (C Face):||1.125||Mounting Style:||Base|
|Output Shaft Assembly Code:||D|