Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-40-R-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Frame Size:||180||Input HP:||8.105|
|Output Shaft Assembly Code:||R||Output Style:||R|
|Series Code:||GR||Output Torque:||9419|
|Keyway:||1/4 X 1/8||Output Shaft Orientation:||R|
|Reducer Style:||Worm - Right Angle||Series Type:||Cast Iron 800 Worm Gear Reducers|
|Output Key:||1/2 X 3.50||Input RPM:||1,750|
|Input Style:||C-face Quill||Output RPM:||43|
|Overhung Load:||3,560||Series Style:||GR-BMQ-R|
|Mounting Style:||Base||Output HP:||6.538|
|No. of Gear Reductions:||Single||Assembly:||BMQ-R|
|Model Code:||BMQ852||Input Diameter (in):||1.125 in|
|Product Type:||Right Angle||Shaft Seal Material:||Viton|
|Gear Type:||Worm||Output Diameter (in):||2.000 in|
|Service Factor:||1||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Quill Diameter (in):||1.125 in||Center distance (inch):||5.25|
|Input Bore (C Face):||1.125||Input Keyway (C Face):||1/4 x 1/8|
|Output shaft:||Shaft||Reducer:||Worm - Right Angle|
|Gear Drive Reductions:||Single||Housing material:||Cast Iron|
|Product Line:||GR Series - Ironman Worm Gear Reducers|