Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-40-L-180
Image differs from product
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Series Style:||GR-BMQ-L||Output RPM:||43|
|Output Key:||1/2 X 3.50||Output HP:||6.538|
|Series Code:||GR||Input HP:||8.105|
|Overhung Load:||3,560||Output Style:||L|
|Mounting Style:||Base||Input RPM:||1,750|
|Keyway:||1/4 X 1/8||Reducer Style:||Worm - Right Angle|
|Frame Size:||180||Output Shaft Orientation:||L|
|No. of Gear Reductions:||Single||Input Style:||C-face Quill|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output Torque:||9419|
|Output Shaft Assembly Code:||L||Shaft Seal Material:||Viton|
|Housing material:||Cast Iron||Reducer:||Worm - Right Angle|
|Center distance (inch):||5.25||Ratio:||40:1|
|Gear Drive Reductions:||Single||Assembly:||BMQ-L|
|Input Quill Diameter (in):||1.125 in||Gear Type:||Worm|
|Service Factor:||1||Output Diameter (in):||2.000 in|
|Ratio Range:||40:1||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Product Type:||Right Angle||Input Keyway (C Face):||1/4 x 1/8|
|Output shaft:||Shaft||Input Bore (C Face):||1.125|
|Model Code:||BMQ852||Input Diameter (in):||1.125 in|
|Series:||GR Series - Ironman Worm Gear Reducers|