Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-20-D-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Reducer Style:||Worm - Right Angle||Housing material:||Cast Iron|
|Output HP:||12.98||Input Bore (C Face):||0.625|
|Gear Drive Reductions:||Single||Model Code:||BMQ852|
|Ratio Range:||20:1||Series:||GR Series - Ironman Worm Gear Reducers|
|Input Style:||C-face Quill||Overhung Load:||3,560|
|Output Torque:||9351||Output Key:||1/2 X 3.50|
|Reducer:||Worm - Right Angle||Assembly:||BMQ-D|
|Center distance (inch):||5.25||Output Style:||D|
|Product Type:||Right Angle||Output Diameter (in):||2.000 in|
|Mounting Style:||Base||Series Style:||GR-BMQ-D|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Service Factor:||1|
|Gear Type:||Worm||Input RPM:||1,750|
|Output Shaft Assembly Code:||D||Ratio:||20:1|
|Output shaft:||Shaft||Output Shaft Orientation:||D|
|Input Diameter (in):||0.625 in||Shaft Seal Material:||Viton|
|Input Keyway (C Face):||3/16 x 3/32||Input HP:||15.56|
|Frame Size:||56||Output RPM:||87|
|No. of Gear Reductions:||Single|