Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-100-R-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Style:||R||Series:||GR Series - Ironman Worm Gear Reducers|
|Mounting Style:||Base||No. of Gear Reductions:||Single|
|Ratio Range:||100:1 to 250:1||Input Bore (C Face):||0.625|
|Input Keyway (C Face):||3/16 x 3/32||Assembly:||BMQ-R|
|Output HP:||1.291||Product Type:||Right Angle|
|Frame Size:||56||Output RPM:||17|
|Model Code:||BMQ852||Input HP:||2.072|
|Reducer:||Worm - Right Angle||Output shaft:||Shaft|
|Housing material:||Cast Iron||Center distance (inch):||5.25|
|Output Key:||1/2 X 3.50||Input Diameter (in):||0.625 in|
|Output Shaft Orientation:||R||Output Diameter (in):||2.000 in|
|Product Line:||GR Series - Ironman Worm Gear Reducers||Series Style:||GR-BMQ-R|
|Service Factor:||1||Output Shaft Assembly Code:||R|
|Input Style:||C-face Quill||Gear Type:||Worm|
|Overhung Load:||3,600||Shaft Seal Material:||Viton|
|Output Torque:||4646||Gear Drive Reductions:||Single|
|Reducer Style:||Worm - Right Angle|