Grove Gear Cast Iron Single-Reduction Worm Reducer - GR-BMQ852-80-R-56
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Bore (C Face):||0.625||Mounting Style:||Base|
|Output Key:||1/2 X 3.50||Output Diameter (in):||2.000 in|
|Series Style:||GR-BMQ-R||Output Torque:||5478|
|Input RPM:||1,750||Product Type:||Right Angle|
|Overhung Load:||3,590||Gear Drive Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Assembly:||BMQ-R|
|Model Code:||BMQ852||Input HP:||2.906|
|Input Style:||C-face Quill||Ratio Range:||80:1|
|Output Shaft Assembly Code:||R||Housing material:||Cast Iron|
|No. of Gear Reductions:||Single||Output Style:||R|
|Output shaft:||Shaft||Output RPM:||21.9|
|Input Keyway (C Face):||3/16 x 3/32||Output HP:||1.902|
|Shaft Seal Material:||Viton||Service Factor:||1|
|Frame Size:||56||Input Diameter (in):||0.625 in|
|Ratio:||80:1||Output Shaft Orientation:||R|
|Series:||GR Series - Ironman Worm Gear Reducers||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Center distance (inch):||5.25||Reducer:||Worm - Right Angle|